the newest laser hair removal machine, Q switch laser tattoo removal machine
Share:
According to the biological characteristics of different tissues, the target tissues can selectively absorb specific wavelength laser, while the surrounding tissues do not absorb or only absorb a few laser. When the pulse width is shorter than or equal to the thermal relaxation time of the target tissue and the energy density is larger than the threshold required for the target tissue damage,
the most effective treatment of the target tissue can be ensured, and the damage to the surrounding normal tissue is minimized.
•
Q-switched Nd:yag laser makes the peak power increase, with the characteristics of high strength and low energy. When 1064nm laser passes through a KTP crystal, the frequency-doubled effect is obtained and the 532 nm laser is produced.
•
The wavelength of 1064nm can be well absorbed by melanin, which selectively makes small heat-absorbing particles (tattoo ink, melanin, etc.) suddenly heated and
damaged. Meanwhile, it does not damage the surrounding tissues and has a good
effect on the deep blue and melanin lesions, such as naevus fusconceruleus, nevus of Ota, bad tattoo, tattoo eyebrow. However, the curative effect on epidermal
pigmented diseases is poor.
• The wavelength of 532 nm can be strongly absorbed by red and brown
pigment, and it has good effect on superficial pigment diseases, such as
coffee spot, senile plaque, sunspot, freckle.
*12 inch intuitive full size touch screen
*Virtually flat top beam for minimal side effects
*Real-time energy monitor & Auto-Calibration System
*Pulse width down to 5ns as Lutronic, Alma laser and Luminues
*Adjustable spot size 2-10mm
*Water Filtration System
*Self-testing system for online trouble shooting
|
Item |
EXQ-Laser |
Others |
|
Power supply |
TDK from Japan |
China |
|
Pump delivery |
15m |
2.5m |
|
Power input |
Wide range power input |
Single power input |
|
Lamp |
Medical grade Imported from Japan |
China |
|
Switch |
Medical grade imported from Japan |
China |
|
Cord connectors |
Medical grade imported from Switzerland |
China |
|
PFC modular |
Yes-power stabilizer, and 10% energy saving than normal ones |
NO |
FDA Approved Q-Switched Nd Yag Tattoo Laser Removal Machine
1.Skin rejuvenation with laser peeling.
2.Removal of eyebrow line, eye line, lip line etc.
3.Removal of colorful tattoo: red, blue, black, brown etc.
4.Clearance speckle, freckle, coffee spots, sun-burn spots, age spotsetc.
5.Removal of vascular lesion and spider vessel; Removal of birth mark,nevus etc.
• Indications are different depending on the wavelength:
•
The penetration of 1064 nm is deeper, which is mainly used to treat pigmented
lesions of the dermis, such as chloasma, naevus fusconceruleus, nevus of ota , etc.
At the same time, it is also used to do blue and black tattoo removal. The immediate
reaction is local needle-like blood (except chloasma, chloasma can only be scanned
with large spot and small energy).
•
The penetration of 532nm is shallow, which is mainly used to treat pigmented skin
lesions of the epidermis, such as freckle, nevoid lentigo, sunburn, seborrheic
keratosis, coffee spot, freckle, nevoid lentigo. It is also used to do red and brown
tattoo removal. The immediate reaction is that the skin is just whitish.
• In the use of the machine, doctors should flexibly adjust parameters according to the actual situation: individual differences (such as patient tolerance) treatment response, etc. Before using it, Skin tests should be performed to avoid accident.
•
For several treatments, the treatment should start with low energy, and increase it step by step. The doctor adjust the parameters in time according to the patient's response
•
Skin must be thoroughly cleaned before operation. On the one hand is to avoid residual cosmetics blasting during the treatment, on the other hand is that some areas require 3 to 7 days to stay free of water after treatment.
•
Alcohol or iodophor cotton ball, saline, sterile gauze, and disposable ice bag should be prepared before operation. The application of anesthetic usually takes 30 min-50 mins.
Removing the anesthetic and wiping skin with saline cotton ball before treatment.
•
The patient needs a lying position. Using saline gauze to cover eyes or wearing eye masks directly to avoid damage to eyes caused by laser misfire.
Turn on the machine. Firstly, select the wavelength according to the disease to be
treated. Then adjust the spot size on the handpiece, and set the parameters of energy,
frequency. Finally, start treatment.
•
The light is completely controlled by the foot switch, so the operator should be careful when pressing Ready. He should master the rhythm of the treatment so as
not to damage normal tissue by the laser.
•
Operators also should protect themselves, especially using Q532 nm green light, he must use protective goggles. In the treatment, the hands should be perpendicular to the healing skin area. Try to use low frequency (except for full face treatment). Try not to overlap treatment to prevent energy accumulation.
•
It is very important to do local cold compress after operation. Pay attention to the aseptic gauze in the place where the ice bag touches the operation area. Cold
compress for more than 30 minutes will reduce the occurrence of blisters after operation.
•
Using antibiotic ointment (generally erythromycin eye ointment) in the operative area to prevent infection. If scab forms, the patient must pay attention to avoid touching water and keeping it dry. The scab should be natural exfoliation, and not be forcibly removed.
It is very important to pay attention to sun protection after treatment. Good therapeutic effect is the combination of reasonable treatment parameters and
postoperative maintenance.
•
One week after the operation, the scab should naturally fall off. At this time the patient can use physical sun protection, such as using sun umbrella. Do not use
erosive products, such as keratolytics or efficacy products one month after treatment.
•
After the scab falls off, the patient should apply the sunscreen with SPF30+ when he goes out.
Highly dermatologists recommended post laser skin care products. Tiferono.
|
Laser Type |
Q-Switched Nd:Yag |
High Energy Q-Switched Nd:Yag |
|||
|
Wavelength |
1064nm |
532nm |
1064nm |
532nm |
|
|
Pulse Width |
5ns |
5ns |
8ns |
8ns |
|
|
Pulse Energy |
500mJ |
200mJ |
1000mJ |
500mJ |
|
|
Pulse Energy Range |
200-500mJ |
100-200mJ |
100-1000mJ |
100-500mJ |
|
|
Frequency |
5Hz |
5Hz |
|||
|
Spot Size |
2-10mm Adjustable |
2-10mm Adjustable |
|||
|
Fluence |
0.2-16J/cm² |
0.1-6.3J/cm² |
1.3-32J/cm² |
0.6-16J/cm² |
|
|
Aiming Beam |
635nm, ＜5mW |
||||
|
Electrical Requirements |
110-240VAC 50-60Hz 1200VA |
||||
|
Dimension |
351mm*925mm*775mm(without optical articulated arm) |
||||
|
Net Weight |
80 Kg |
||||
