OPT IPL Laser Multifunctional Machine Portable Fast Hair Removal Ready To Ship

Portable Ipl Portable Ipl Machine Laser Hair Removal Multifunction

Enviromental requirements 

Before removing the package, you should examine the treatment area conforms to the requirements  described in this chapter or not. 

The system should be installed away from hot wind-gap and keep enough distance from blocks.

The electrical requirements of the system shows as following: 

Ø Single-phase 230V, 10A, 50Hz  

Ø The system is grounded through the grounding conductor in the power cable. This protective  grounding is essential for safe operation. 

Ø For the best operation, you should keep the temperature of the treatment room at about 20ºC,  and the relative humidity should be below 70%.

Skin test is essential before the optional treatment. 

The details are as following: 

1) If do treatment for all face, the test patch should be selected under the ears where not influencing  the facial beauty. If for chest, neck or other skin, it should be selected the site where not  influencing the beauty.  

2) Clean the test patch and apply a layer of coupling gel at the test patch. Take out of the treatment handle and aim the light guide at the test patch. 

Trigger 2-3 shots (1/3 area of the spot size  overlapping the treatment site is permitted.), and wait for 2-3 minutes to examine the test patch: 

Ø If lightly swelling and/ or reddening at the test patch appears several minutes later,  continue the treatment with the same settings of energy level and pulse type. 

Ø If no visible changes at the patch appear, continue the test with 1-2j/cm² higher  energy level.  

Ø If the skin show adverse effect or excessive reddening and/or swelling at the test  patch just after shot, continue the test with lower energy level.

Application

* Skin Rejuvenation

* Removing epidermal pigmentation

* Painless hair removing

* Removing vascular

* Removing acne