coolplas body slimming weight loss machine cellulite removal for sale with certificate
Share:
Reminders of Coolplas Cryolipolysis(Very important)
1 Anti-freezing Membrane: During the cryotherapy process, make sure the anti-freezing membrane fully covers the treatment area. If not, the skin may have frostbite.
The suction generated by the vacuum process may suck in a part of the membrane, so make sure the treatment area won't touch the handpiece directly.
2.Time: 30-60 minutes for one treatment.
3. Temperature: Hospitals can use - 10 degrees for treatment, beauty salons can
use - 8 degrees. Temperature can be adjusted by yourself, but never below - 10 degrees Celsius!
4.Vaccum intensity： It can be based on customers’ acceptable range, we suggest 40KPa for the first 3 minutes, after that you can adjust according to customers’ feelings. Please decrease it if feels too tight and hurt.
5.Frequency: One part one time, another part should depend on the recovery situation of the first part, the interval treatment for the same part should be at least one month(Because it depends on the body metabolism to move the dissolving fat out of the body, it needs time to do that)
6.Feelings: The treatment area may have slight pain during the first few minutes,10 minutes later the pain will gradually disappear.
7.Treatment parts: It's designed for localized hypertrophic fat accumulation areas, physically healthy people, but not suitable for overall obesity. Treatment mainly for a particular part, such as waist fat, belly and back, and other local cellulite. Treatment is not omnipotent and can not cure obesity, it can not replace liposuction or other invasive therapies.
8.Coldinjury situation: If the skin got frostbite, stop the treatment and buy frostbite ointment, apply it to the burnt area, if the situation is very serious, please go to see a doctor.
9.Special crowd:To the people who have sensitive skin to cold, please choose a higher temperature during the cryotherapy, and also put a plastic wrap on the membrane.
10.Clean filter: Please clean the filter every week, or the vacuum system will be choked, Very Important.
11.Water: Change the water every month in the machine, you can use pure water or distilled water. Or the flow sensor will cause trouble.
12.For beauty salons: After every treatment (60 minutes), please stop the machine for 10 minutes (for relax of the machine)
